BQLZR AC 220V 10A 1CH 433MHZ Wireless RF Remote Control Switch Transmitter+ Receiver Black

Specifications: Powered By : 27A/12V ALKALINE Battery(Not Included Here); Power supply(Operating Voltage) : AC 220V Operating Frequency : 433MHZ; Remote Control Distance: 15-30m Transmitter Size : 60 x 26 x 14mm/2.4″ x 1″ x 0.55″(LxWxT); Receiver Module Size : 50x35x22cm/19.68×13.77×8.66Inch(LxWxT); Weight :105g Operation Way and Steps: 1). Factory Default is Inching Mode. Press and hold the button A, the Receiver A (Relay A)turns on; Release the button A, the Receiver A (Relay A) turns off. 2)Self-lock : Press the button A, the Receiver A (Relay A) turns on; Press the button A again, the Receiver A (Relay A) turns off. 2 chnage working mode: 1. Clear: Press&hold the program button on the receiver, the Tomato light will turn on and stay on for about 5 seconds 2se the Working Mode: Press and hold the learning button on the receiver, the Tomato light will turn on and stay on for about 5 seconds, then turn off (Clearing Steps), do not release, still hold the learning button, and then the Tomato light will begin to flash, it will flash once, then twice, and finally three times. (1)After the light flashes ONCE, release the learning button, it becomes Inching Mode. (2)After the light flashes TWICE, release the learning button, it becomes Self- lock Mode. (3)After the light flashes THREE times, release the learning button,it becomes Interlocked Mode. 3. Link the remote control: Press the program button on the receiver until the Tomato light turns on, and then release the program button, the Tomato light will stay ons a transmitter button, and the Tomato light will flash, at this time, it means finished linking. Package Content: 1 x Transmitter(not include battery 1 x Wireless Remote Receiver 1 x Case 1 x Screw driver 1 x Cable